Precolor Easy - Get creative, stay natural, love colours
- 14 unique colours
- Natural look and feel
- Ecological: 0% VOC
- Suitable for almost all wood types indoor
This product is a pre-treatment and always has to be combined with Oil Plus 2C.
The 100ml and 1L packagings are ideal for treating furniture and objects. For larger surfaces such as floors and stairs, it is better to ask help from a professional.
- Free shipping on orders over £50
- Next day delivery
- Secure payments
Need help or professional advice quickly?
Our experts are available on workdays from 8:30 AM to 4:30 PM.
They are happy to help you via email or telephone.
- E-mail us:Hello@rubiomonocoat.com
- Call us:0800 688 9661
Need help or professional advice quickly?
Our experts are available on workdays from 8:30 AM to 4:30 PM.
They are happy to help you via email or telephone.
- E-mail us:Hello@rubiomonocoat.com
- Call us:0800 688 9661
› Furniture and stairs
STEP 1. Sand the surface scratch-free. Finish with screening net 100 to 150, the colour intensity depends on the sanding method used.
- When renovating, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.).
STEP 2. Vacuum thoroughly and eliminate remains of dust with Cleaner. Wait until the surface is completely dry (check the technical datasheet of the Cleaner before use).
STEP 3. Stir the product thoroughly and regularly with a stirring stick.
STEP 4. Apply an amount of Precolor Easy with the Rubio Monocoat Brush and spread out using a red Scrubby Pad. Wipe out evenly with a lint-free cloth. Work in small areas to avoid overlapping.
- For smaller objects and corners you can also use the green Mouse Pad.
STEP 5. Allow the surface to dry for ± 12 hours. The exact drying time depends on the foundation, moistening, temperature and ventilation.
STEP 6. After drying, break the raised wood fibres with a red Scrubby Pad and vacuum afterwards.
STEP 7. Now apply the Oil Plus 2C. Please consult the technical data sheet of the oil for a correct application. Be careful, in combination with Precolor Easy it is best to use a white Scrubby Pad instead of a beige or red one when applying the oil!
› Floors
STEP 1. Sand the surface scratch-free. Finish with screening net 100, the colour intensity depends on the sanding method used.
- When renovating, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.).
STEP 2. Vacuum thoroughly and eliminate remains of dust with Cleaner. Wait until the surface is completely dry (check the technical datasheet of the Cleaner before use).
STEP 3. Tape off areas of ± 90 cm, in the lengthwise direction of the boards.
STEP 4. Stir the product thoroughly and regularly with a stirring stick.
STEP 5. Apply the Precolor Easy with a Microfibre Pad. Make sure to use enough of the product and cover the whole area. Afterwards smooth out the area again with the same Microfibre Pad. Make sure that this pad is thoroughly wrung out.
STEP 6. Now skip an area and follow the instructions in step 5 again for this next area. Finish the whole room in this way and remove the tape. Allow the surface to dry for ± 12 hours.
STEP 7. Now tape off the untreated areas and apply the Precolor Easy as described in step 5. Repeat until the whole floor is treated. Afterwards remove the tape (tip: step on the already dried out areas to remove the tape).
STEP 8. Allow the surface to dry for ± 12 hours. The exact drying time depends on the foundation, moistening, temperature and ventilation.
STEP 9. After drying, break the raised wood fibres with a floor polisher equipped with a red Pad and vacuum afterwards.
STEP 10. Now apply the Oil Plus 2C. Please consult the technical data sheet of the oil for a correct application. Be careful, in combination with Precolor Easy it is best to use a white Pad instead of a beige or red one when applying the oil!
› Industrial application
If you want to apply this product in an industrial manner, we advise you to get in contact with our technical service team.
- Stir the product well before application.
- When using several containers at one site, it is required to mix them for an even result.
- Switch off the floor heating 48 hours before application.
- Do not use in combination with water-based finishing products, such as Invisible Protector.
- Difficult to apply on herringbone parquet.
- Keep in mind that the wood type, grain structure and porosity of the wood can influence the end result. Therefore, it is important tomake a sample first on the chosen wood species or the surface that needs treating.
10-15 m²/liter*
* These usages are merely indicative. Results depend on wood type, sanding and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.
- The product can be stored up to 12 months in dry, frost-free conditions and in its original packaging.
Would you like to give your interior wood a unique or intense colour or create a special contrast? Then the Precolor Easy offers unlimited creative possibilities! The pre-colour is available in 14 colours, which can also be mixed with one another. In combination with the no less than 40 colours of Oil Plus 2C you will obtain not only optimal protection but also a unique colour!
The pre-colour preserves the natural look & feel of the wood and is suitable for both vertical and horizontal application. In addition, the product is very environmentally friendly. For example, the pre-treatment is water-based and contains 0% VOC (Volatile Organic Compounds, harmful substances that are released when applying products and which increase the greenhouse effect). Finally, the low consumption results in huge savings on packaging and transport.
Please note that this product is a pre-colour and does not protect the wood. Always combine this product with Oil Plus 2C for optimal protection with molecular bonding.
- Physical state: liquid
- Flash point: > 60°C
- Density: 1,01 kg/L
- VOC content: 0 g/L
- Solubility in water: 100%
Datasheets
- Natural look
- Water-based pre-treatment
- 14 unique colours
- Ready to use
- Unlimited combinations possible (all colours can be mixed with one another)
- Can be applied to almost all wood types and wood species (solid wood, veneer, mdf, etc.)
- Can be applied to all interior wood surfaces (caution, not advised on kitchen and bathroom counters)
-
Belgium - Norway
-
Romania -
United Kingdom -
Ireland -
Finland
