Pre-Aging - For a fumed or smoked look
- 10 unique and stable colours
- Non-reactive pre-treatment
- Fumed or smoked look
- Can be applied to almost all wood types indoors
- Free shipping from £ 50
- Next day delivery
- Secure payments
Need help or professional advice quickly?
Our experts are available on workdays from 8:30 AM to 4:30 PM.
They are happy to help you via email or telephone.
- E-mail us:hello@rubiomonocoat.co.uk
- Call us:0800 688 9661
Need help or professional advice quickly?
Our experts are available on workdays from 8:30 AM to 4:30 PM.
They are happy to help you via email or telephone.
- E-mail us:hello@rubiomonocoat.co.uk
- Call us:0800 688 9661
› Furniture, stairs & worktops
STEP 1. Sand the surface scratch-free. Finish with screening net 100 to 150, the colour intensity depends on the sanding method used.
- When renovating, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.).
STEP 2. Vacuum the surface thoroughly.
STEP 3. Shake the Pre-Aging well before use and pour in a bucket (Rubio Monocoat Bucket).
STEP 4. Apply the product evenly and in a saturated manner on the to be treated surface with a Rubio Monocoat tool, such as a Microfibre Pad, Brush, Sponge, spray gun or roller.
- Tip: For edges/corners: apply with brush (Rubio Monocoat Brush) or a green Mouse Pad.
STEP 5. Smooth out with a beige Scrubby Pad. Avoid puddle formation.
STEP 6. Allow to dry for about 24 hours and ensure sufficient ventilation. The exact drying time depends on the foundation, air humidity, temperature and ventilation.
- Tip: It is perfectly normal for the surface to dry in ‘spots’ that follow the grain pattern. As long as the surface still looks ‘spotted’, it is not dry yet.
STEP 7. After drying, break the raised wood fibres with a red Scrubby Pad and vacuum afterwards.
STEP 8. Now apply the Oil Plus 2C. Please consult the technical data sheet of the oil for a correct application.
› Floors
STEP 1. Sand the surface scratch-free. Finish with screening net 100, the colour intensity depends on the sanding method used.
- When renovating, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.).
STEP 2. Vacuum the floor thoroughly.
STEP 3. Shake the Pre-Aging well before use and pour in a bucket (Rubio Monocoat Bucket).
STEP 4. Apply the product in a saturated manner with a Rubio Monocoat Microfibre Pad. Work in areas of ± 90 cm. Afterwards smooth out the area again with the same Microfibre Pad. Make sure that this pad is thoroughly wrung out. Avoid puddle formation.
- Tip: For edges/corners: apply with brush (Rubio Monocoat Brush) or a green Mouse Pad.
STEP 5. Allow to dry for about 24 hours and ensure sufficient ventilation. The exact drying time depends on the foundation, air humidity, temperature and ventilation.
- Tip: It is perfectly normal for the surface to dry in ‘spots’ that follow the grain pattern. As long as the surface still looks ‘spotted’, it isnot dry yet.
STEP 6. After drying, break the raised wood fibres with a floor polisher equipped with a red Pad and vacuum afterwards.
STEP 7. Now apply the Oil Plus 2C. Please consult the technical data sheet of the oil for a correct application.
› Industrial application
If you want to apply this product in an industrial manner, we advise you to get in contact with our technical service team.
- Keep in mind that the wood type, grain structure and porosity of the wood can influence the end result. Therefore, it is important to make a sample first on the chosen wood species or the surface that needs treating.
- When using several containers at one site, it is required to mix them for an even result.
- To avoid overlapping, always work wet-on-wet.
- On resinous wood species small white stains may appear as a reaction of the product to the wood.
10-15 m²/litre*
* These usages are merely indicative. Results depend on wood type, sanding and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.
- The product can be stored up to 36 months in dry conditions and in its original packaging. Keep away from frost.
Would you like a fumed or smoked look for your interior wood? Then Rubio Monocoat Pre-Aging offers the perfect solution. The non-reactive pre-colouring is available in 10 colours that also colour the hard parts of the wood and the sapwood and which can be mixed with each other. In combination with the 40 colours of Oil Plus 2C, you will obtain not only optimum protection but also the desired colour.
In contrast to reactive pre-treatments, with the Pre-Aging you always get a stable colour and you are not bothered by a strong odour. The pre-colouring is suitable for vertical as well as horizontal application and can be used on almost all types of wood, even those without tannins.
Thanks to the Pre-Aging, your wooden project will get a cosy, old look!
- Physical state at 20 °C: Liquid
- Aqueous
- Odour: Sweet odour
- Flash point: > 100°C
- Density: approx. 1 kg/L
- Boiling point: approx. 100 °C
Datasheets
- Non-reactive water-based pre-treatment
- Stable colour that can easily be reproduced, as opposed to reactive stains which are dependent on the tannins present in the wood
- Excellent spot-resistance after treatment with Rubio Monocoat oil
- Deep colouring with subtle accents
- Applicable to virtually all wood types, including those without tannins
- Can be applied to all indoor wooden surfaces
- PH-neutral product, as opposed to reactive pre-colours
- Does not affect the quality of the finishing coat
- Minimal odour
- Also colours the hard parts of the wood and the sapwood
- No overlaps
- Colours can be mixed with each other
-
Belgium -
Serbia -
Belgium
