Floor Care Bundle - Maintenance package for oiled floors

Maintaining your wooden floor is a walk in the park thanks to our Floor Care Bundle. This maintenance package contains everything you need to keep your oiled wooden floor in perfect condition.
  • Ready-to-use set for floors
  • Provides additional protection
  • Ecological: 0% VOC
  • Application tools included
Read more
  • Free shipping on orders over £50 EX VAT
  • Next day delivery
  • Secure payments

Need help or professional advice quickly?

Our experts are available on workdays from 8:30 AM to 4:30 PM.
They are happy to help you via email or telephone.

Need help or professional advice quickly?

Our experts are available on workdays from 8:30 AM to 4:30 PM.
They are happy to help you via email or telephone.




STEP 1. Vacuum the surface. Remove dust, sand, stones, …

STEP 2. Clean the surface with a mop or cloth. Caution, do not leave water on the surface, it is sufficient to simply clean damp. 

STEP 3. Allow to dry. Do not walk on the floor until it is completely dry.



STEP 1. Take the Universal Maintenance Oil 2 Mix and carefully add the Oil Plus 2C component A in the same colour with which the surface was originally treated. The correct ratio is 3 parts Universal Maintenance Oil 2 Mix to 1 part Oil Plus 2C (as provided in the packaging set). Mix thoroughly.

STEP 2. Apply a small amount of Universal Maintenance Oil 2 Mix with a brush and afterwards spread out in the direction of the wood using a Flexible Pad Holder, Extension Pole and a red pad. Preferably work in areas of 5 to 10 m² (areas which you can finish within ± 15 minutes, including the next step).

STEP 3. Allow to absorb for a few minutes and massage the oil into the wood with a white pad.

STEP 4. Wipe away all the excess oil with a Rubio Monocoat Oil removal cloth. The surface should look even.


Tips & Tricks


  • Make sure that there is sufficient ventilation during and after application to speed up the curing process.
  • The product may not be diluted under any circumstances, unless indicated in the instructions.
  • Stir the product well before application.
  • Maintenance with Oil Plus 2C in the original colour of application is recommended as soon as the treated surface starts to show too much wear. 
  • Replace the Rubio Monocoat Oil removal cloth timely. If the cloth no longer absorbs sufficient oil, it is time to replace it.




400 ml = 50-75 m²

  • Set = 300 ml Universal Maintenance Oil 2 Mix + 100 ml Oil Plus 2C, Comp. A

* These usages are merely indicative. Results depend on wood type, wear and tear and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.


  • Linseed oil is a natural product and not subject to spontaneous combustion. However, oil on a cloth or other tools does entail a fire risk. The oxidation of the oil leads to heat accumulation, which can result in spontaneous combustion. Therefore, the cloths and other tools must be soaked in water before disposal.

Is your oiled wooden floor the eye-catcher in your home and do you want to take care of it properly? Then you will find everything you need in our Floor Care Bundle. The Universal Maintenance Oil 2 Mix will freshen up your wood and provide it with even better protection. In addition to this maintenance oil, the bundle also contains many useful application tools.

Contents of the maintenance package:

  • Universal Maintenance Oil 2 Mix (300 ML)
  • Oil Plus 2C Component A (100 ML)
  • Extension Pole & Flexible Pad Holder
  • Rubio Monocoat Brush (medium)
  • Red & white pads (5 each)
  • Mixing cup & Stirring stick
  • Shoe protectors
  • Set of protective gloves
  • Oil removal cloth 
Floor Care Bundle


Universal Maintenance Oil 2 Mix:

  • Physical state at 20°C: liquid
  • Basis: a mixture of natural oils
  • Density: 0.93 - 1.4 g/cm³
  • Flash point: > 65°C
  • VOC content: 0 g/L


WORKABLE TIME Once the product is mixed: use within 24h
APPLICATION INFORMATION All interior wooden surfaces that are already treated with Oil Plus 2C
CLEANING At the earliest after 48h


Oil Plus 2C (A):

  • Physical state at 20°C: liquid
  • Odour: oily
  • Flash point: > 100 °C
  • Density: > 0.9 kg/L
  • VOC content: 0 g/L


  • Preserves the natural look and feel of the wood
  • Sustainable maintenance
  • Both the Oil Plus 2C and the Universal Maintenance Oil 2 Mix contain 0% VOC and have received the certificates Food Contact Compliance and Toy Safety. This means that the products are safe to use for toys and surfaces that come into contact with food.