Oil Plus 2C

Basically, this can be done with Oil Plus 2C from 48 hours after the treatment.  Use felt or corrugated cardboard (with the even side face down). Never use any kind of tape. Please take into account that you need to add the time the surface is...

Under optimal drying conditions, the wooden surface can be lightly used or handled after about 24-36 hours. At the 48-hour mark, the oiled furniture is roughly 80% cured. Complete curing occurs within approximately 5 days.

Rubio Monocoat Oil Plus 2C is a unique, single-component, oil-based finish that provides superior protection and color to wooden surfaces. It's made with natural ingredients such as linseed oil, which penetrates into the wood fibers to enhance its natural...

Tests have confirmed that Oil Plus 2C is food safe and fully compliant when applied to a wooden surface. If Rubio Monocoat Oil Plus 2C (A+B) is used on a food-safe wooden surface, the combination of the wood and our Oil Plus 2C remains safe. This means...

20ml - 0.8m², 130ml - 5m² 350ml -14m² 1.3L - 52m² 3.5L - 140m²

We'd recommend sanding up to a 120-150 grit. However, we have known customers to go up to higher than this grit, with no problems. We'd always recommend testing anything outside of our recommendations first.

Once mixed, the Oil Plus 2C (Parts A and B) will last in the pot of 4-6 hours, depending on the temperature. The accelerator will make the mixture harden and it will be unusable. 

We would recommend Oil Plus 2C in Mist 5%.

Our Oil Plus 2C can be safely used on a food contact surface. We even have a Food Contact Compliance from an independent testing institute (Eurofins). 

No, Oil Plus 2C must come into contact with raw cellulose in order to properly work. So all previous treatments should be removed by sanding before applying Oil Plus 2C.

No, Oil Plus 2C offers enough protection. However, an optional extra protection coat with Universal Maintenance Oil can be applied after 36-48 hours (and when the surface is completely dry) in case the surfaces are highly subjected to liquids, mechanical...

The product can be stored up to 36 months in dry conditions and in its original packaging. If you mix the A and B components both together, the product can only be used for a maximum of 4 - 6 hours after mixing. 

Simply put, Pure contains no pigment and Natural contains a creamy whitish/yellowish pigment. Which one is clear? Neither. While Pure contains no pigment, clear is not the best description because Oil Plus 2C is a linseed oil based product. Linseed ...

If you mix the A and B components both together, the product can only be used for a maximum of 4 - 6 hours after mixing.

You can remove the excess by using a Rubio Monocoat purple GS320 Pad. Go over the surface with this pad to equalise the colour and remove all the excess. Change the pad regularly.  Once this is done, apply a new thin layer of Oil Plus 2C in the...