Deep Cleaner - Intense cleaner
- Intense cleaner
- Perfect for yellowed white floors
- Suitable with and without re-oiling
- Removes greasy film from soap
- Free shipping from £ 50
- Next day delivery
- Secure payments
Need help or professional advice quickly?
Our experts are available on workdays from 8:30 AM to 4:30 PM.
They are happy to help you via email or telephone.
- E-mail us:hello@rubiomonocoat.co.uk
- Call us:0800 688 9661
Need help or professional advice quickly?
Our experts are available on workdays from 8:30 AM to 4:30 PM.
They are happy to help you via email or telephone.
- E-mail us:hello@rubiomonocoat.co.uk
- Call us:0800 688 9661
STEP 1. Clean the surface by using a damp sponge/mop (water only).
STEP 2. Wipe out the diluted Deep Cleaner (max. 5% Deep cleaner to 95% water) evenly on the surface by using a sponge/mop.
STEP 3. Scrub the treated area with a nylon scrubbing brush or Microfibre Pad in the lengthwise direction of the wood until the surface is clean. This will cause the product to foam. For stubborn stains, repeat the treatment.
STEP 4. Remove the dissolved dirt with a damp cloth/ mop and clear water until the surface looks clean.
STEP 5. Allow it to dry well (± 30 minutes at a temperature of 20°C and in a well-ventilated room).
STEP 6. In case the surface needs a reoiling (when it feels rough or the colour looks faded), it should be treated with the original Oil Plus 2C colour.
- The scrubbing process can be replaced with a scrubbing machine using a beige pad or preferential a scrubbing brush since this will go deeper into the wood pores. This procedure is suited if you already decided to go for a re-oiling. We don’t recommend following this method when no new oil will be applied.
- Using a machine with cylindrical brushes (type scrubber dryer) will be the most beneficial since this machine will follow the direction of the wood fibres and easily remove dirt and rinsing water.
- Work in small zones to make sure the surface doesn’t stay too wet for too long.
- When using Deep Cleaner, pay attention to adjacent floors or other material.
- Can also be used as a preparatory product for oily woods (tropical hardwoods), such as teak, iroko, kambala, wenge, eucalyptus, merbau, afzelia, afrormosia, etc. These surfaces should be finished with Oil Plus 2C.
Manual
Depending on the surface ca. 200-300 m²/L of the concentrate or 10-15 m²/L of the diluted product.
These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a
sample in order to calculate the exact usage.
- Deep Cleaner is a concentrate and must therefore be diluted with water before use (max. 5% Deep Cleaner to 95% water).
- The product can be stored up to 12 months in dry conditions and in its original packaging. Keep away from frost.
The Deep Cleaner is an intensive cleaner for all types of wooden surfaces treated with Oil Plus 2C. The curative cleaner is suitable for dirty surfaces or greasy soap residues and can also be used as a preparatory cleaner before re-oiling.
The Deep Cleaner opens the wood pores and removes accumulated dirt from the wood grains. The product also makes yellowed floors look whiter and more radiant (note: this will not reduce the oxidation of the wood affected by UV). Do you use the Deep Cleaner before re-oiling the wood? Then the product improves the quality of the re-oiled layer.
Please note: Deep Cleaner is a concentrate and should therefore be diluted with water before use. Take into account a maximum ratio of 5% Deep Cleaner to 95% water.
- Physical state at 20°C: liquid
- Colour: transparent
- Odour: characteristic
- pH value: 1,3
- Density: 0,99 kg/L
Datasheets
Without re-oiling
- Removes the greasy film that appears due to excessive soap usage
- Opens the wood pores and removes accumulated dirt that is sticking into the wood grain
- White floors will look more bright and less yellow (however, the oxidation of the UV-affected wood will not be reduced by using Deep Cleaner)
Before re-oiling
- Removes traces of excessive soap and dirt and therefore improves the quality of the re-oiling layer
- Easy-to-use: re-oiling can be done without resanding
- The new oil layer will penetrate perfectly in the open wood pores
